Fluid Management Services 

Capabilities

• Fluid storage
• Fluid heating

Equipment Features

• Sloped floor 64m³ (12’ x 21’)
• 5 valves including one 2.5' high
• Sealed, electronic gauges
• Underbalanced flanges located at 16.5' for testing capability
• Sealed manway door (sour service) located on side and top
• Pressure relief thief hatch (16 oz standard)
• Ears on 4 corners (picker) skids
• 2” Steam coils (80 psi)
• Carbon or stainless steel downcomers vent at the back of the tank
• Epoxy coating system available for ultra-clean storage
• Vinyl ester coating and specialized accessory equipment available on acid service tanks

HSE Considerations

• Toe rails, ladder cages, and non-slip coating on roof ensure worker safety
• Tanks meet OH&S amendments as outlined in subsection 12.10 of the regulations
• Coatings expert on staff
• Tanks are subjected to thorough inspection and maintenance protocol
• Fluid storage history is tracked, documented and available for every tank

For more detailed information and pricing contact your local account representative.

• 6 kW, four mercury halide lamps
• 10.8 kW, six halogen lamps
• 20 kW, six mercury halide lamps
• Self-contained units are diesel-powered and capable of providing additional power supply for lease shacks or test units
• Automatic air shutdowns
• Licensed for travel
• Explosion-proof lights

For more detailed information and pricing contact your local account representative.

• 8’ x 16’ mats
• 8’ x 40’ mats
• Unique vertical board layout increases durability and allows for easier repair

For more detailed information and pricing contact your local account representative.

• Durable, weather-resistant drip trays eliminate environmental impact by collecting any valve spillage

For more detailed information and pricing contact your local account representative.

• Allow safe, easy access to bermed tank farms

For more detailed information and pricing contact your local account representative.

• 20’ or 40’ manifolds supplied in catch tubs
• 8” and 10" manifold reduced to 4’ outlets with 4” valves
• Approximately 12 valve outlets per side on a 40’ manifold and up to 8 per side on smaller units
• Complete with all hoses and accessories

For more detailed information and pricing contact your local account representative.

• 15Hp pump is rated for invert at 1.1 m3 / minute*
• 5 Hp pump is rated for diesel at 0.8 m3 / minute*
• 0.5 Hp pump 1” for diesel*
  
  *  Volumes may vary depending on operating conditions

For more detailed information and pricing contact your local account representative.

  Environmental Containment Systems

• Interlocking sectional system can be customized to any shape or size
• Each molded polyethylene section is 6 ft. long and 34" high, lengths are joined using 24" square corner pieces
• Liner fastened securely over the top of the dyking ensures 100% spill containment
• DC Energy is an official distributor and installer of the G-55 Containment System


For more detailed information download this document … or contact your local account representative.

• 2m3 vac tanks
• 1m3 wash tanks

For more detailed information and pricing contact your local account representative.

• Transformers available to utilize almost any type of 3 phase power, step up (220V – 440V) or step down (600 – 440V).

For more detailed information and pricing contact your local account representative.

• Allow vehicular and pedestrian traffic to safely and easily pass over manifold lines without having to bury them

For more detailed information and pricing contact your local account representative.